MODULE 12 · LESSON 12.9
Retrograde transit boundaries
वक्री गोचर और राशि-सीमाएँ
A transit can leave a sign and later re-enter it.
New term? Open the bilingual glossary / नया शब्द? शब्दावली खोलें →
Explanation
The astronomical engine evaluates the selected instant, including whether Mercury through Saturn are moving retrograde at that moment.
A retrograde planet can cross a sign boundary more than once. Therefore long transit windows should ultimately be built from actual ingress events, not mean orbital durations.
The Transit Lab date picker is instant-based: choose any date/time and inspect that moment directly.
Transit analysis begins with a natal reference. First calculate where the graha is now, then count its position from natal Moon or Lagna according to the rule being taught. A transit position by itself is not a life-event prediction.
Keep plain Gochar, Vedha, Ashtakavarga support and transit-to-natal contacts as separate layers. Combining them is a later synthesis step; the Transit Lab labels them separately to prevent accidental mixing.
Step by step
- Choose the transit date/time.
- Read the transiting planet’s sidereal sign/degree.
- Count from natal Moon and Lagna.
- Check the lesson’s base Gochar rule and BAV support.
- Add natal contacts and Dasha context separately.
Key points
- Transit is time-dependent calculation.
- Moon-relative and Lagna-relative counts are separate references.
- A structural Sade Sati phase is not an automatic prediction.
Common mistake
Do not label a transit as “good/bad” from one house count while ignoring natal condition and timing context.
Do it yourself
- Open Transit Lab and set one date.
- Choose Saturn or Jupiter and write sign, house from Moon and house from Lagna.
- Add BAV bindus and any natal contact as separate lines.
Check yourself
Why should a future ingress timeline not assume one continuous stay per sign?
Show answer
Retrograde motion can cause re-entry.
हिंदी में पढ़ें
वक्री गोचर और राशि-सीमाएँ
गोचर ग्रह राशि छोड़कर वक्री होकर उसी में वापस आ सकता है।
खगोलीय इंजन चुने हुए क्षण पर बुध से शनि तक वक्री स्थिति भी जाँचता है।
वक्री ग्रह राशि-सीमा एक से अधिक बार पार कर सकता है। इसलिए लंबी गोचर अवधियाँ औसत अवधि से नहीं, वास्तविक प्रवेश घटनाओं से बननी चाहिए।
Transit Lab का तारीख चयन क्षण-आधारित है: तारीख/समय चुनें और उसी क्षण को देखें।
गोचर-पढ़ाई जन्म-संदर्भ से शुरू होती है। पहले वर्तमान ग्रह स्थिति गणना करें, फिर पाठ के नियम के अनुसार जन्म चंद्र या लग्न से उसका स्थान गिनें। केवल गोचर-स्थिति अपने-आप जीवन-घटना नहीं बताती।
Plain Gochar, Vedha, Ashtakavarga support और transit-to-natal contact अलग परतें हैं। इन्हें मिलाना बाद का समन्वय चरण है; Transit Lab इन्हें अलग लेबल करता है।
चरण-दर-चरण
- गोचर तिथि/समय चुनें।
- गोचर ग्रह की निरयन राशि/अंश पढ़ें।
- जन्म चंद्र और लग्न से गिनें।
- पाठ का मूल गोचर नियम और BAV support देखें।
- जन्म संपर्क और दशा-संदर्भ अलग जोड़ें।
मुख्य बिंदु
- गोचर समय-निर्भर गणना है।
- चंद्र और लग्न से गिनती अलग संदर्भ हैं।
- साढ़ेसाती की संरचनात्मक अवस्था अपने-आप भविष्यफल नहीं है।
सामान्य गलती
जन्म-स्थिति और समय-संदर्भ छोड़कर केवल एक भाव-गिनती से गोचर को “अच्छा/बुरा” न कहें।
खुद करके देखें
- Transit Lab में एक तिथि चुनें।
- शनि या गुरु चुनकर राशि, चंद्र से भाव और लग्न से भाव लिखें।
- BAV बिंदु और जन्म संपर्क अलग पंक्तियों में जोड़ें।
स्वयं जाँचें
भविष्य प्रवेश समयरेखा हर राशि में एक ही लगातार अवधि क्यों न माने?
वक्री गति से ग्रह राशि में दोबारा प्रवेश कर सकता है।