MODULE 12 · LESSON 12.8
Transit contacts with natal planets
गोचर ग्रहों का जन्म ग्रहों से संबंध
Separate same-sign contact from full Parashari graha drishti.
New term? Open the bilingual glossary / नया शब्द? शब्दावली खोलें →
Explanation
For each moving graha the lab lists natal planets occupying the same sign. It also lists natal planets reached by the full sign-based aspects already taught in Module 4.
Mars receives its 4th/7th/8th pattern, Jupiter 5th/7th/9th, Saturn 3rd/7th/10th, and the other classical planets the 7th.
Rahu/Ketu special aspects remain excluded because the course has deliberately not selected one disputed convention.
Transit analysis begins with a natal reference. First calculate where the graha is now, then count its position from natal Moon or Lagna according to the rule being taught. A transit position by itself is not a life-event prediction.
Keep plain Gochar, Vedha, Ashtakavarga support and transit-to-natal contacts as separate layers. Combining them is a later synthesis step; the Transit Lab labels them separately to prevent accidental mixing.
Step by step
- Choose the transit date/time.
- Read the transiting planet’s sidereal sign/degree.
- Count from natal Moon and Lagna.
- Check the lesson’s base Gochar rule and BAV support.
- Add natal contacts and Dasha context separately.
Key points
- Transit is time-dependent calculation.
- Moon-relative and Lagna-relative counts are separate references.
- A structural Sade Sati phase is not an automatic prediction.
Common mistake
Do not label a transit as “good/bad” from one house count while ignoring natal condition and timing context.
Do it yourself
- Open Transit Lab and set one date.
- Choose Saturn or Jupiter and write sign, house from Moon and house from Lagna.
- Add BAV bindus and any natal contact as separate lines.
Check yourself
Does this transit contact layer use Rahu/Ketu special aspects?
Show answer
No.
हिंदी में पढ़ें
गोचर ग्रहों का जन्म ग्रहों से संबंध
एक ही राशि में संपर्क और पूर्ण पाराशरी ग्रह-दृष्टि को अलग रखें।
हर चल ग्रह के लिए प्रयोगशाला उसी राशि में स्थित जन्म ग्रहों को दिखाती है। साथ ही मॉड्यूल 4 में पढ़ी पूर्ण राशि-आधारित ग्रह-दृष्टियाँ भी दिखती हैं।
मंगल 4/7/8, गुरु 5/7/9, शनि 3/7/10 और अन्य शास्त्रीय ग्रह 7वीं पूर्ण दृष्टि उपयोग करते हैं।
राहु/केतु की विशेष दृष्टियाँ अभी शामिल नहीं हैं क्योंकि पाठ्यक्रम ने किसी विवादित परंपरा को चुपचाप नहीं चुना है।
गोचर-पढ़ाई जन्म-संदर्भ से शुरू होती है। पहले वर्तमान ग्रह स्थिति गणना करें, फिर पाठ के नियम के अनुसार जन्म चंद्र या लग्न से उसका स्थान गिनें। केवल गोचर-स्थिति अपने-आप जीवन-घटना नहीं बताती।
Plain Gochar, Vedha, Ashtakavarga support और transit-to-natal contact अलग परतें हैं। इन्हें मिलाना बाद का समन्वय चरण है; Transit Lab इन्हें अलग लेबल करता है।
चरण-दर-चरण
- गोचर तिथि/समय चुनें।
- गोचर ग्रह की निरयन राशि/अंश पढ़ें।
- जन्म चंद्र और लग्न से गिनें।
- पाठ का मूल गोचर नियम और BAV support देखें।
- जन्म संपर्क और दशा-संदर्भ अलग जोड़ें।
मुख्य बिंदु
- गोचर समय-निर्भर गणना है।
- चंद्र और लग्न से गिनती अलग संदर्भ हैं।
- साढ़ेसाती की संरचनात्मक अवस्था अपने-आप भविष्यफल नहीं है।
सामान्य गलती
जन्म-स्थिति और समय-संदर्भ छोड़कर केवल एक भाव-गिनती से गोचर को “अच्छा/बुरा” न कहें।
खुद करके देखें
- Transit Lab में एक तिथि चुनें।
- शनि या गुरु चुनकर राशि, चंद्र से भाव और लग्न से भाव लिखें।
- BAV बिंदु और जन्म संपर्क अलग पंक्तियों में जोड़ें।
स्वयं जाँचें
क्या यह गोचर-संपर्क परत राहु/केतु की विशेष दृष्टियाँ उपयोग करती है?
नहीं।